HAKA 150/51h
Categories
Detaje teknike
| Klasi i energjisë: | A+ |
|---|---|
| Fuqia: | 10 – 20 kW |
| Rendimenti: | >80% |
| Lartësia e derës: | 519 mm |
| Gjerësia e derës: | 1507 mm |
| Gjerësia totale: | 1708 mm |
| Thellësia totale: | 567 mm |
| Diametri i tubit: | 250 mm |
| Hapja e derës | Me ngritje |
| Pesha: | 536 Kg |
| Prodhuar në: | Çeki |
Fireplace technology
When building a modern fireplace, the contractor faces the same challenges as the fireplace insert manufacturer. It takes a lot to put together a functional and aesthetically pleasing fireplace that meets the challenging design and quality demands of investors. A customer buying a new fireplace asks the same questions. What makes this solution special? What extras do I get? In order to make sure your experience translates into great projects and work goes well, and so you can give meaningful answers to questions like these, you'll need a product which sets the world alight. We offer you top quality fireplace inserts, a wide range of accessories and customizations, and full technical support for your work. We're in it together.
Construction of the fireplace
100% inspection
Trouble-free inspection of all moving components through insert inspection holes or doors even after installation into an enclosed fireplace shell.
40 mm thick chamotte with tongue and groove joints
Surface treatment of visible parts with water-based eco-friendly paint with 600 °C resistance.
Stainless steel combustion air control mechanism which can be inspected through the firebox
Liftdoor mechanism can be thoroughly inspected through the door
Inspection hole for access to counterweight and liftdoor mechanism wire.
Surface treatment of the body with eco-friendly paint
with 600 °C resistance
Integrated flange for central air supply for combustion
Air ducting into the firebox
The combination of correct combustion air ducting, flue gas extraction piping, and an ideally tight firebox is the prerequisite for clean and ecological combustion.
Vermiculite deflectors ideally positioned for high efficiency and low emissions
Air ducts with precise cross-section and position with regard to optimum preheating of the air for combustion
Integrated central combustion air inlet with 50 mm flange length
Adjustable sliding secondary air rails for rinsing the exposed glass
Adjustable primary air rails adaptable to specific installation conditions
Sophisticated liftdoor mechanism
The door is pressed against the frame with a spring mechanism during closing. Each of the four springs extends a carrier with two bearings that travel on stainless steel rails. The spring mechanism absorbs deformations resulting from the thermal load. So the operation of the mechanism is smooth and the firebox is still sufficiently tight. The liftdoor mechanism can be thoroughly inspected through the firebox and the top lift pocket.
Stainless steel running rails made of 2.5 mm thick steel with a ramp end to press the door against the frame
Dual plain bearing carrier with temperature resistance of 350 °C
A thrust spring designed in a shape ensuring flawless functionality throughout the working range without contact with the bearing pin
Pulley with groove for wire and bearing with a resistance of 350 °C
Stranded steel wire with a high strength of 5.8 kN
A tight door
A stable and durable door profile is the basis for success in fireplace tightness. Our enclosed door profile with a material thickness of 2.5 mm provides the stability of these properties even with larger door sizes and high temperature loads.
Outer glass seal with a thicker part that fits into a groove in the profile and a thinner part that fills the space between the glass and the door profile
Seals to ensure expansion of the outer glass from the metal parts
Groove fixing the seal in a permanent position in the door profile
U-shaped gasket to ensure the expansion of the inner glass from the metal parts
Robust door seal fixed in the tapered groove of the door profile
Stainless steel inner glazing bar
Firebox lining
We only use materials fired at temperatures above 1,000 °C to guarantee zero residual moisture, which could lead to damage to the lining.
Nyrolit
- Thickness 30 mm
- Refractory concrete with high thermal and mechanical resistance
- Use for "N" model combustion chambers, "G" model deflectors, and HAKA 63/51(W)a lining
Dark chamotte
- Dark coloured mixture throughout the complete volume
- Thickness 40 mm
- Tongue and groove joint system
Light chamotte
- Thickness 40 mm
- Tongue and groove joint system
